AS -1115HS-TNR
PrintKey Features
- 1. 4th Generation AMD EPYC™ 9004 Series Processor
- 2. ASPEED AST2600
- 3. 24 DIMM slots with 2 DIMM per channel (up to 6TB DDR5-4000MHz(1R)/3600MHz(2R)) OR
12 DIMM slots with 1 DIMM per channel (up to 3TB DDR5-4800MHz)
- 4. 1 PCIe 5.0 x16, FH, 6.6"L
2 PCIe 5.0 x16 FH, 10.5"L
Flexible networking options with 1 AIOM networking slot (OCP NIC 3.0 compatible)
- 5. 8 Hot-swap 2.5” NVMe/SAS/SATA (Option for up to 12 drives)
(Optional parts required for NVMe/SAS/SATA configurations)
- 6. 800/1200W Redundant Power Supplies (Titanium Level)
(*Full redundancy based on configuration and application load)
- 7. 2 On-board NVMe M.2 slots; 1x PCIe 3.0 x4, 1x PCIe 3.0 x2; 80mm/110mm (Boot)
Specifications
|
|
Parts List
Standard Parts (Parts Included) | |||
Part Number | Qty | Description | |
Motherboard / Chassis |
MBD-H13SSH CSE-HS119-R1K24P2-A |
1 1 |
Super H13SSH Motherboard 1U Chassis |
Add-on Card / Module | AOM-HS119-IO-P | 1 | Hyper IO Board,RoHS |
Backplane | BPN-NVME5-HS119N-S8L | 1 | 1U 8-slot backplane support 8x SAS3/SATA3/NVME5 storage devices for Hyper-S platform,RoHS |
Cable | CBL-GNZ5-1307 | 1 | GNZ4C+ X16 (STR to STR),G5,7CM,85 Ohm,RoHS |
CBL-MCIO-1221M5RE | 1 | MCIO x8 (STR to RE),21cm,32AWG,G5,RoHS | |
CBL-MCIO-1228M5RE | 1 | MCIO x8 (STR to RE), 28cm, 30#, Gen5, 85Ohm, RoHS | |
CBL-PWEX-1142B-20 | 1 | MicroHi (2x4F to 2x4F), PH3.0, 20cm, 8.5A/p,18#,RoHS | |
CBL-SAST-1225LP | 1 | SlimlineLP x8 (LE) to SlimlineLP x8 (RA),30CM,75/85/100, | |
CBL-CUSB-1265-119 | 1 | [NR] USB 3.0(F) Type A, RA to USB3.0 20pin,65CM,26/32AWG | |
CBL-PWCD-0160-IS | 2 | PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH | |
Fan | FAN-0216L4-3 | 1 | 40x40x56 mm, 31K-26.6K RPM, Counter-rotating Fan for H13 Hyp |
FAN-0216L4-1 | 7 | 40x40x56 mm, 31K-26.6K RPM, Hot Swap, Counter-rotating Fan,, | |
Drive Tray(s) | MCP-220-00178-0B | 8 | 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive), for SC119UH |
Air Shroud | MCP-310-11920-0B | 1 | 1U Hyper Chassis HS119 CPU Mylar Air Shroud for H13SSH |
Riser Card | RSC-H-66G5L | 1 | 1U LHS Hyper riser card with two PCIe 5.0X16 slots,HF,R |
RSC-H-6G5L | 1 | 1U LHS Hyper riser card with one PCIe 5.0 X16 slot,HF,R | |
Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management |
Heatsink / Retention | SNK-P0082P | 1 | 1U Passive CPU Heat Sink for AMD Socket SP5 Processors |
*Power Supply | PWS-1K24A-1R | 2 | 1U 800W/1200W Redundant Titanium CRPS w/PMBus power supply, |
*Front Panel | FPB-FP119UH | 1 | Front control board for 119UHTS 1U Ultra |
Notes:
|
Optional Parts List | |||
Part Number | Qty | Description | |
12 NVMe | CBL-MCIO-1342M5FRFB | 1 | MCIO x8 (STR to STR), FFC, Bundled 34+42cm, 30AWG |
CBL-PWEX-1136-40 | 1 | power cable, (2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
MCP-220-00178-0B • | 4 | 2.5 thin profile drive tray | |
BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS/SATA/NVME | |
CBL-KIT-1115HS-TNR-8N | 1 | 8 NVME cable kit | |
12 SAS | BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS/SATA/NVME |
AOC-S3816L-L16iT OR AOC-S3916L-H16iR CBL-SAST-1273LP-100 (Support HDD slot 0~7) CBL-SAST-1262LP-100 (Support HDD slot 8~11) |
1 1 1 1 |
16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD 16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD Slimline x8 (LE) to 2x Slimline x4 (STR),FFC,76/76CM Slimline x8 (STR) to Slimline x4 (STR),64CM | |
CBL-CDAT-1062Y-45 | 1 | i2C Y cable (1x4 to 2x 1x4),45cm,26AWG | |
CBL-PWEX-1136-40 | 1 | power cable, (2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
MCP-220-00178-0B • | 4 | 2.5 thin profile drive tray | |
12 SATA | CBL-CDAT-1062Y-45 | 1 | i2C Y cable (1x4 to 2x 1x4),45cm,26AWG |
CBL-MCIO-1326EQL4F | 1 | MCIO x8/STR to SlimSAS LP x4/STR, FFC,F26cm, 31AWG | |
CBL-PWEX-1136-40 | 1 | power cable, (2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
MCP-220-00178-0B • | 4 | 2.5 thin profile drive tray | |
BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS/SATA/NVME | |
CBL-MCIO-1360L4FY | 1 | MCIO x8/STR to 2 SlimSASLP x4/STR,FFC,F46/60cm | |
8 NVMe | CBL-KIT-1115HS-TNR-8N | 1 | 8 NVME cable kit |
8 NVMe + 4 SAS | MCP-220-00178-0B • | 4 | 2.5 thin profile drive tray |
BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS/SATA/NVME | |
AOC-S3816L-L16iT OR AOC-S3916L-H16iR CBL-SAST-1262LP-100 (Support HDD slot 8~11) |
1 1 1 |
16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD 16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD Slimline x8 (STR) to Slimline x4 (STR),64CM | |
CBL-CDAT-1062Y-45 | 1 | i2C Y cable (1x4 to 2x 1x4),45cm,26AWG | |
CBL-KIT-1115HS-TNR-8N | 1 | 8 NVME cable kit | |
CBL-PWEX-1136-40 | 1 | power cable, (2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
8 NVMe + 4 SATA | BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS/SATA/NVME |
CBL-CDAT-1062Y-45 | 1 | i2C Y cable (1x4 to 2x 1x4),45cm,26AWG | |
CBL-MCIO-1326EQL4F | 1 | MCIO x8/STR to SlimSAS LP x4/STR, FFC,F26cm, 31AWG | |
CBL-KIT-1115HS-TNR-8N | 1 | 8 NVME cable kit | |
CBL-PWEX-1136-40 | 1 | power cable, (2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
MCP-220-00178-0B • | 4 | 2.5 thin profile drive tray | |
8 NVMe/SAS Hybrid | AOC-S3816L-L16iT OR AOC-S3916L-H16iR CBL-SAST-1273LP-100 |
1 1 1 |
16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD 16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD Slimline x8 (STR) to 2x SlimLLP x4 STR,69/83CM |
CBL-KIT-1115HS-TNR-8N | 1 | 8 NVME cable kit | |
8 NVMe/SATA Hybrid | CBL-MCIO-1360L4FY | 1 | MCIO x8/STR to 2 SlimSASLP x4/STR,FFC,F46/60cm |
CBL-KIT-1115HS-TNR-8N | 1 | 8 NVME cable kit | |
8 SAS | AOC-S3816L-L16iT OR AOC-S3916L-H16iR CBL-SAST-1273LP-100 |
1 1 1 |
16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD 16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD Slimline x8 (STR) to 2x SlimLLP x4 STR,69/83CM |
CBL-CDAT-1062Y-45 | 1 | i2C Y cable (1x4 to 2x 1x4),45cm,26AWG | |
8 SATA | CBL-MCIO-1360L4FY | 1 | MCIO x8/STR to 2 SlimSASLP x4/STR,FFC,F46/60cm |
CBL-CDAT-1062Y-45 | 1 | i2C Y cable (1x4 to 2x 1x4),45cm,26AWG | |
Chassis Rear Handle Kit | MCP-290-11905-0N | 1 | Hyper 1U rear handle kit for immersion cooling |
Drive Bay Dummy Cover | MCP-220-11902-0B | - | Dummy cover for two 2.5" drive bays (top & bottom drive bays) |
Rail Set | MCP-290-21103-0N | 1 | 21.65" ball-bearing rail set for Hyper servers |
MCP-290-11903-0N • (included in the system ) | 1 | 30.5" ball-bearing rail set for Hyper servers | |
MCP-290-11902-0N | 1 | 35.25" ball-bearing rail set for Hyper servers | |
MCP-290-11901-0N | 1 | 41" ball-bearing rail set for Hyper servers | |
Serial Port DTK Cable with PCIe Bracket | CBL-0010L • | 1 | 9-Pin 26CM Serial Port DTK Cable with PCIe Bracket |
TPM security module | AOM-TPM-9670V | 1 | SPI capable TPM 2.0 with Infineon 9670 controller; vertical form factor |