슈퍼솔루션
Servers & StorageBuilding BlocksloT & EmbeddedWorkstations
Servers & StorageBuilding BlocksloT & EmbeddedWorkstations

슈퍼마이크로 슈퍼마이크로는 기업 컴퓨팅, 스토리지, 네트워킹 솔루션 및 그린 컴퓨팅 기술 분야의 글로벌 리더입니다.

AS-1125HS-TNR

Print
Views Angled ViewsTop ViewsFront ViewsRear Views

Key Features

  • Key Applications
    - Virtualization
    - Software-defined Storage
    - AI Inference and Machine Learning
    - Cloud ComputingEnterprise Server

    Key Features
  • 1. 4th Generation AMD EPYC™ 9004 Series Processors
  • 2. ASPEED AST2600
  • 3. 24 x DIMM slots, DDR5 -4800 memory support up to 6 TB
  • 4. 1 PCIe 5.0 x16, FH, 6.6"L
    2 PCIe 5.0 x16 FH, 10.5"L
    Flexible networking options with 1 AIOM networking slot (OCP NIC 3.0 compatible)
  • 5. 8 Hot-swap 2.5” NVMe/SAS/SATA2 (Option for up to 12 drives)
    800/1200W Redundant Power Supplies (Titanium Level)
    (*Full redundancy based on configuration and application load)
    2 On-board PCIe 3.0 x4 M.2 NVMe 80mm/110mm (Boot)
Specifications
Product SKUs
A+ Server AS -1125HS-TNR (Black front & sliver body)
Motherboard
Super H13DSH
Processor
CPU
  • Dual Socket SP5
  • 4th Generation AMD EPYC™ 9004 Series Processor
  • Support CPU TDP up to 360W *
Cores
  • Up to 192C/384T
Note
  • *Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory
Memory
  • Memory Capacity: 24 DIMM slots
  • Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz
  • Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory
Note
  • For optimal performance AMD recommends full memory population
Memory Voltage
  • 1.1 V
Error Detection
  • Corrects single-bit errors Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • System on Chip
Network Connectivity
  • Via AIOM
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Input / Output
LAN
  • 1 Dedicated IPMI LAN port
USB
  • 3 USB 3.0 port(s) (1 front; 2 rear)
Video
  • 1 VGA port(s)
System BIOS
BIOS Type
  • AMI 256MB SPI Flash
BIOS Features
  • ACPI 6.4
  • Plug and Play (PnP)
  • SMBIOS 3.5 or later
  • UEFI 2.8
  • USB Keyboard support
Management
Software
  • IPMIView for Linux/ Windows
  • IPMICFG
  • SSM
  • SPM
  • SUM
  • Watch Dog
  • SuperDoctor® 5
Power Configurations
  • Power-on mode control for AC power loss recovery
  • ACPI Power Management
PC Health Monitoring
Voltage
  • System temperature, Memory temperature, CPU temperature, 3.3V standby, +5V standby, +5V, +3.3V, +12V, CPU thermal trip support
FAN
  • Fans with tachometer monitoring
  • Pulse Width Modulated (PWM) fan connectors
  • Status monitor for speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U
Model
  • CSE-HS119-R1K24P2-A
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 29.4" (747mm)
Package
  • 8.1" (H) x 23.8" (W) x 40.6" (D)
Weight
  • Net Weight: 32 lbs (14.5 kg)
  • Gross Weight: 51 lbs (23.1 kg)
Available Color
  • Black front & sliver body
Front Panel
Buttons
  • Power On/Off
  • UID button
LEDs
  • HDD activity
  • LAN1 activity
  • Power status
  • System information
Expansion Slots
PCI-Express (PCIe)
  • 1 PCIe 5.0 x16 FH, 6.6"L slot(s)
  • 2 PCIe 5.0 x16 FH, 10.5"L slot(s)
Drive Bays / Storage
Hot-swap
  • 8x 2.5" hot-swap NVMe/SATA/SAS drive bays (Up to 12x 2.5" hot-swap NVMe/SATA/SAS support with additional parts)
M.2
  • 2x NVMe (PCIe 3.0 x4, Boot drive only)
  • M-Key, 2280/22110
System Cooling
Fans
  • 8x 4cm heavy duty fans with optimal fan speed control
Air Shroud
  • 2 Air Shroud(s)
Power Supply
1U 800W/1200W Redundant Titanium CRPS w/PMBus power supply
Dimension

(W x H x L)
  • 73.5 x 40 x 265 mm
AC Input
  • 800W: 100-127Vac / 9.8A-7A / 50-60Hz
  • 1200W: 200-240Vac / 7.5A-6A / 50-60Hz
+12V
  • Max: 83A / Min: 0A (100Vac-127Vac)
  • Max: 100A / Min: 0A (200Vac-240Vac)
12V SB
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
Certification Titanium Level94%+   Titanium Level

 

  [ Test Report ]
Operating Environment
Environmental Spec.
  • Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Note
  • Operating Temperature based on configurations 


Parts List
Standard Parts (Parts Included)
Part Number Qty Description
Motherboard / Chassis MBD-H13DSH

CSE-HS119-R1K24P2-A 		1

1 		Super H13DSH Motherboard

1U Chassis
Add-on Card / Module AOM-HS119-IO-P 1 Hyper IO Board,RoHS
Backplane BPN-NVME5-HS119N-S8L 1 1U 8-slot backplane support 8x SAS3/SATA3/NVME5 storage devices for Hyper-S platform,RoHS
Cable CBL-GNZ5-1307 1 GNZ4C+ X16 (STR to STR),G5,7CM,85 Ohm,RoHS
CBL-MCIO-1221M5RE 1 MCIO x8 (STR to RE),21cm,32AWG,G5,RoHS
CBL-MCIO-1228M5RE 1 MCIO x8 (STR to RE), 28cm, 30#, Gen5, 85Ohm, RoHS
CBL-PWEX-1142B-20 1 MicroHi (2x4F to 2x4F), PH3.0, 20cm, 8.5A/p,18#,RoHS
CBL-SAST-1225LP 1 SlimlineLP x8 (LE) to SlimlineLP x8 (RA),30CM,75/85/100,
CBL-CUSB-1265-119 1 [NR] USB 3.0(F) Type A, RA to USB3.0 20pin,65CM,26/32AWG
CBL-PWCD-0160-IS 2 PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH
Fan FAN-0216L4-1 1 40x40x56 mm, 31K-26.6K RPM, Hot Swap, Counter-rotating Fan,,
FAN-0216L4-1 7 40x40x56 mm, 31K-26.6K RPM, Hot Swap, Counter-rotating Fan,,
Drive Tray(s) MCP-220-00178-0B 8 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive), for SC119UH
Riser Card RSC-H-66G5L 1 1U LHS Hyper riser card with two PCIe 5.0X16 slots,HF,R
RSC-H-6G5L 1 1U LHS Hyper riser card with one PCIe 5.0 X16 slot,HF,R
Software SFT-OOB-LIC 1 License key for enabling OOB BIOS management
Heatsink / Retention SNK-P0082P 2 1U Passive CPU Heat Sink for AMD Socket SP5 Processors
*Power Supply PWS-1K24A-1R 2 1U 800W/1200W Redundant Titanium CRPS w/PMBus power supply,
*Front Panel FPB-FP119UH 1 Front control board for 119UHTS 1U Ultra
Notes:
  1. Parts with * are inside the chassis
  2. Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Optional Parts List
Part Number Qty Description
8 NVMe CBL-MCIO-1359M5FRF 1 MCIO x8 (FR to STR), FFC,59cm,30AWG
CBL-MCIO-1242M5REL 1 MCIO x8 (RE to LE),42cm,30AWG
CBL-MCIO-1356M5FHB 1 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG
8 NVME + 4 SAS CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
CBL-MCIO-1359M5FRF 1 MCIO x8 (FR to STR), FFC,59cm,30AWG
CBL-MCIO-1242M5REL 1 MCIO x8 (RE to LE),42cm,30AWG
AOC-S3808L-L8iT OR
AOC-S3908L-H8iR
CBL-SAST-1262LP-100 		1
1
1		 8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD
8 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD
Slimline x8 (STR) to SlimLineLP x4 STR,98CM
CBL-MCIO-1356M5FHB 1 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG
8 NVME + 4NVME CBL-MCIO-1356M5FHB 1 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
CBL-MCIO-1343M5FRF 1 MCIO x8 (FR to STR), FFC,43cm,30AWG
CBL-MCIO-1352M5FRF 1 MCIO x8 (FR to STR), FFC,52cm,30AWG
CBL-MCIO-1359M5FRF 1 MCIO x8 (FR to STR), FFC,59cm,30AWG
CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-MCIO-1242M5REL 1 MCIO x8 (RE to LE),42cm,30AWG
CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
8 NVME+ 4 SATA CBL-MCIO-1242M5REL 1 MCIO x8 (RE to LE),42cm,30AWG
CBL-MCIO-1255L4Y 1 MCIO x8 to 2 SlimSAS LP x4,STR,55cm
CBL-MCIO-1356M5FHB 1 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG
CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-MCIO-1359M5FRF 1 MCIO x8 (FR to STR), FFC,59cm,30AWG
8 SAS AOC-S3808L-L8iT OR
AOC-S3908L-H8iR
CBL-SAST-1273LP-100 		1
1
1		 8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD
8 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD
Slimline x8 (STR) to 2x SlimLLP x4 STR,69/83CM
8 SAS + 4 SAS CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
AOC-S3816L-L16iT OR
AOC-S3916L-H16iR
CBL-SAST-1276F-100 (Support HDD slot 0~7)
CBL-SAST-1265F-100 (Support HDD slot 8~11) 		1
1
1
1		 16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD
16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD
Slimline x8 (LE) to 2x Slimline x4 (STR),FFC,76/76CM
Slimline x8 (STR) to Slimline x4 (STR),64CM
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
8 SATA CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-MCIO-1255L4Y 1 MCIO x8 to 2 SlimSAS LP x4,STR,55cm
8 SATA + 4 SATA CBL-PWEX-1136-40 1 MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG
MCP-220-00178-0B 4 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive)
BPN-NVME5-HS119N-S4R 1 1U 4-slot backplane, 4x SAS3/SATA3/NVME5
CBL-CDAT-1062Y-45 1 Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG
CBL-MCIO-1255L4Y 2 MCIO x8 to 2 SlimSAS LP x4,STR,55cm
Serial Port DTK Cable with PCIe Bracket CBL-0010L • 1 9-Pin 26CM Serial Port DTK Cable with PCIe Bracket