|
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X12DHM-6
CSE-HS119-R1K24P
|
1
1
|
Super X12DHM-6 Motherboard
1U Chassis
|
Add-on Card / Module
|
AOM-HS119-IO-P |
1 |
Hyper IO Board,RoHS |
Backplane
|
BPN-NVME4-HS119N-S8L |
1 |
1U 8-Port Backplane Supports 8 x SAS3/SATA3/NVMe4 Storage Device for Hyper-S Platform,HF,RoHS |
Cable 1
|
CBL-GNZ4-1261-85 |
1 |
[NR] GENZ4C x16 (STR) to GENZ4C x16 (STR),85CM,85 OHM,RoHS |
Cable 2
|
CBL-PWEX-1120 |
1 |
[NR] MicroFit,2x4,PH3.0 to MicroFit,2x4,PH3.0,60CM,8A/pin,16 |
Cable 3
|
CBL-SAST-1225LP |
1 |
[NR]SlimlineLP x8 (LE) to SlimlineLP x8 (RA),30CM,75/85/100, |
Cable 4
|
CBL-SAST-1234LP-85 |
2 |
[NR] SlimlineLP x8 (STR) to 2x SlimlineLP x8 (STR),17CM,85 O |
Drive Tray(s)
|
MCP-220-00178-0B |
8 |
2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive), for SC119UH |
Riser Card
|
RSC-H-66G4L |
2 |
1U LHS Hyper riser card with two PCI-E 4.0 X16 slots,HF,RoHS |
Heatsink / Retention
|
SNK-P0077V |
2 |
X12 ICX/CPX CPU Heatsink (78x113x25.5mm), VC Base, Cu Fin |
*Power Supply
|
PWS-1K24A-1R |
2 |
1U 800W/1200W Redundant Titanium CRPS w/PMBus power supply, |
*Cable 5
|
CBL-CUSB-1265-119 |
1 |
[NR] USB 3.0(F) Type A, RA to USB3.0 20pin,65CM,26/32AWG |
*Cable 6
|
CBL-PWCD-0160-IS |
1 |
PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH |
*FAN 1
|
FAN-0216L4 |
8 |
40x40x56 mm, 31K-26.6K RPM, Hot Swap, Counter-rotating Fan,R |
*Front Panel
|
FPB-FP119UH |
1 |
Front control board for 119UHTS 1U Ultra |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|