|
|
|
Part Number |
Qty |
Description |
HD Backplane | BPN-SAS3-946SEL2 | 2 | 30-port 4U 946S Top-load SAS3 12Gbps dual-expander midplane, support up to 30x 3.5-inch SAS3/SATA3 HDD/SSD (secondary expander port only connects to dual-port SAS devices, single-port SATA will not have this redundancy feature) |
Control Board | CSE-PTJBOD-CB3 | 1 | JBOD chassis power control board with IPMI remote on/off feature |
Cable(S) | CBL-0087 | 1 | CBL,FRONT CNTL,16 TO 16 PIN,Ribbon,50CM |
Cable(S) | CBL-0160L | 2 | US POWER CORD 16AWG, PB FREE |
Cable(S) | CBL-0303L | 1 | 4PIN POWER CABLE, ST TO RA, 40CM |
Cable(S) | CBL-0459L | 2 | AC Power Cord Latch Clamp |
Cable(S) | CBL-CDAT-0601 | 2 | 4 Pin to 4 Pin I2C cable, 50cm, 26AWG |
Cable(S) | CBL-NTWK-0587 | 1 | INT RJ45M/RJ45F Adapter W/ PCB 50CM 24AWG for SC847D JBOD |
Cable(S) | CBL-PWCD-0578-1 | 2 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG,RoHS |
Cable(S) | CBL-PWCD-0578-IS | 2 | PWCD,US,IEC60320 C14 TO C13,910mm,14AWG,15A,250V,Black, RoHS |
Cable(S) | CBL-PWEX-0861 | 1 | Powerlug to 5.7 Radsok, black 12AWG, 32cm for SC946S |
Cable(S) | CBL-PWEX-0862 | 1 | Powerlug to 5.7 Radsok, black 12AWG, 53cm for SC946S |
Cable(S) | CBL-PWEX-0863 | 1 | Powerlug to 5.7 Radsok, yel 12AWG, 32cm for SC946S |
Cable(S) | CBL-PWEX-0864 | 1 | Powerlug to 5.7 Radsok, yel 12AWG, 53cm for SC946S |
Cable(S) | CBL-SAST-0833 | 4 | SLIMLINE SAS, INT, 55MM, 32AWG |
Cable(S) | CBL-SAST-0834 | 4 | SLIMLINE SAS to MiniSAS HD, INT, 50CM, 32AWG |
Cable(S) | CBL-SAST-0835 | 4 | SLIMLINE SAS to MiniSAS HD, INT, 100CM, 32AWG |
Fan(s) | FAN-0184L4 | 5 | 80x80x38 mm, 14.4K RPM, Rear Exhaust Fan for SC946S Chassis (60-bay) |
Front Panel | FPB-FP829H | 1 | Front Control Board for SC829H chassis |
Drive Tray(s) | MCP-220-94601-0N | 60 | SC946ED 3.5" / 2.5" tool-less HDD tray |
Power Distributor | PDB-PT946S-L824 | 1 | 4U PDB support over 2KW for SC946S and 45bay system.,RoHS |
Power Supply & Accessory | PWS-1K66P-1R | 2 | 1U 1600W Redundant Platinum Power Supply 73.5mm width,RoHS/REACH,PBF |
Mounting Rail(s) | MCP-290-00133-0N | 1 | Cable Management Arm, 2U height, 4 |
Mounting Rail(s) | MCP-290-00137-0N | 1 | Rail set, Auto-latch, quick/quick, default 4U 17.2";W |
Rear Window | MCP-240-94604-0N | 1 | SC946S rear window, NO I/O. w/ 3x LP slots |